Description of Gear Hobbing Workpiece
2021-12-16 08:51:59
jiangxingTools
3076
Description of Gear Hobbing Workpiece
1) Module
2) Pressure angle
3) Helix angle
4) Number of teeth
5) Tip diameter
6) Root diameter or toot height
7) Profile displacement factor or standards for setting the tooth thickness
8) Gear width
9) Material and tensile strength
10) Number of workpiece to be machined, lot size, if applicable
相關(guān)文章
-
PA20° Standard Involute Gear Milling Cutter with Module m0.6
PA20° Standard Involute Gear Milling Cutter with Module m0.6Module: m0.6, pressre angle: 20°Dimensio... - PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m4
- PA20° Module m4.5 Standard Involute Hob
- Information required when ordering shaving cutters
- Small Module Taper Shank Gear Shaper Cutter
- Gashes for Involute Gear Hob
- Timing Pulley Hob for (AT.)D.T (D)T5
