Bohler S500 for Shaper Cutters and Hobs
2022-08-19 14:14:00
jiangxingTools
2569
Bohler S500 for Shaper Cutters and Hobs
Material composition of S500: C-1.10, Si-0.50, Mn-0.20, Cr-3.90, Mo-9.20, V-1.00, W-1.40, Co-7.80
Standard: 1.3247, HS2-9-1-8, EN ISO 4957
Performance feature of Shaper Cutters and Hobs with S500:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相關(guān)文章
-
PA20° PCD 25mm Shank Type Gear Shaper Cutter with Module m1~m2.75
PA20° PCD 25mm Shank Type Gear Shaper Cutter with Module m1~m2.75Materal：HSS M2, M35, S390Module：m1,... - Spline gear hob with Involute flanks to DIN 5480
- HSS M35, M2E Gear Hob Cutter with Module
- Low Speed Bore Type Solid Carbide Hob for Soft Tooth Oil Cutting
- Shank-type shaper cutter with DIN 5480
- DP Bowl-Shape PCD100mm Straight Tooth Pinion Cutter
- PA20° Pre-shave Gear Hobbing Cutter with Module m4.5
